Home > ICND2 – Drag and Drop 2

ICND2 – Drag and Drop 2

April 6th, 2015 in ICND2 200-101 Go to comments

[am4show have=’p2;’]

Premium Member: You can test your knowledge with these questions first via this link.

[/am4show]

Here you will find answers to ICND 2 – Drag and Drop Questions Part 2

Question 1

[am4show have=’p2;’]Match the categories with the appropriate router output lines.

Layer_Problems.jpg

 

Answer:

[/am4show]1) Port operational: Serial0/1 is up, line protocol is up
2) Layer 2 problem: Serial0/1 is up, line protocol is down
3) Layer 1 problem: Serial0/1 is down, line protocol is down
4) Port disabled: Serial0/1 is administratively down, line protocol is down

Explanation:

A simple way to find out which layer is having problem is to remember this rule: “the first statement is for Layer 1, the last statement is for Layer 2 and if Layer 1 is down then surely Layer 2 will be down too”, so you have to check Layer 1 before checking Layer 2. For example, from the output “Serial0/1 is up, line protocol is down” we know that it is a layer 2 problem because the first statement (Serial0/1 is up) is good while the last statement (line protocol is down) is bad. For the statement “Serial0/1 is down, line protocol is down”, both layers are down so the problem belongs to Layer 1.

There is only one special case with the statement “…. is administratively down, line protocol is down”. In this case, we know that the port is currently disabled and shut down by the administrators.

Question 2

[am4show have=’p2;’]The above provides some descriptions, while the below provides some routing protocols. Drag the above items to the proper locations.

EIGRP_OSPF.jpg

 

Answer:

[/am4show]EIGRP:

+ has a default administrative distance of 90
+ is vendor-specific

OSPF:

+ uses cost as its metric
+ elects a DR on each multiaccess network

Question 3

[am4show have=’p2;’]Drag the term on the left to its definition on the right (not all options are used)

some_rules.jpg

 

Answer:

[/am4show]+ poison reverse: A router learns from its neighbor that a route is down and the router sends an update back to the neighbor with an infinite metric to that route
+ LSA: The packets flooded when a topology change occurs, causing network routers to update their topological databases and recalculate routes
+ split horizon: This prevents sending information about a routeback out the same interface that originally learned about the route
+ holddown timer: For a given period, this causes the router to ignore any updates with poorer metrics to a lost network

Question 4

[am4show have=’p2;’]

RIP_features.jpg

 

Answer:

[/am4show]+ holddown timer: prevents a router from improperly reinstating a route from a regular routing update
+ split horizon: prevents information about a route from being sent in the direction from which the route was learned
+ defining a maximum: prevents invalid updates from looping the internetwork indefinitely
+ route poisoning: causes a routing protocol to advertise an infinite metric for a failed route
+ triggered update: decreases convergence time by immediately sending route information in response to a topology change

Comments (37) Comments
  1. Mike
    December 14th, 2013

    question 4 is using RIPv1 is this a mistake I thought RIP protocol was completely remove from the CCNA exam

  2. Eddis
    December 21st, 2013

    Mike: The concepts listed in Q4 are the same regardless of version. The differences in terms of CCNA level material is that v2 is classless and uses multicast, while v1 is classfull and uses broadcast.

    So in Q4 it could say version 2 or 1, it wouldn’t make a difference to the answers.

  3. Anonymous
    January 19th, 2014

    Q.4 Should not be there. This post probably got updated and admins have not removed the RIP Drag and Drop.

  4. 9tutq
    February 15th, 2014

    @all: Yes, thanks for your detection. We removed the RIPv1 question.

  5. sh
    March 26th, 2014

    To all those who have already made ​​the ICND2
    Drag and Drop 2
    It still valid?

  6. Johnny
    April 8th, 2014

    Just took the ICND2 exam today and got drag and drop questions 2 and 3 only.

  7. Anthony
    April 8th, 2014

    I suppose those are still the accurate answers for question 2?

    You could debate in the comments tab during the exam that Cisco now has made EIGRP open, aka non proprietary, but they may not yet be added to this exam.

    The Bellman-Ford answer is also a tricky, because the DUAL algorithm that EIGRP does use is simply an enhanced version of the Bellman-Ford. I think you could debate this for points as well.

  8. mike
    April 14th, 2014

    Took ICND2 earlier today, 986 / 1000.

    Questions 2 and 4 from this page were on there.

  9. Justin
    April 30th, 2014

    Passed with 986/1000

    Qs 2,3 and 4 were on there

  10. fez
    May 8th, 2014

    2 was there

    Passed today my ICND@2 by 1000. Got different configuration of the Eigrp & frame Relay labs where there were different DLCIs and IP addresses, but same process was used to get answers (show commands, show ip protocols, show ip interface brief ).

    A question about GLBP and a question about netflow were on my test. You can find them here: http://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html

    Study 9tut and this guy i found him really helpful. He has unique way of teaching http://www.danscourses.com If you can do all his videos again and again. Trust me you will get the concept. Also one thing i learned today is if you don’t know the concept it’ll be hard for you in the exam.

    All the best to every one in their path. Keep me in your good wishes.

  11. izzarazzu
    June 28th, 2014

    Took the exam today. Pass 986/1000. Q3 were on there.
    Thanks 9tut.

  12. raghu
    June 29th, 2014

    passed ICND2 today. Question 3 was there.

  13. ALI
    July 7th, 2014

    Q3 it was in there

  14. Ant
    August 20th, 2014

    Tested today, 8/20. #3 was on there.

  15. Georges
    September 27th, 2014

    took the exam today and pass with 907. Question 2 and 3 were on there, the others weren’t. location United States Florida.

    test ICND 2

    Thanks 9tut

  16. Danny
    October 27th, 2014

    Failed ICND2 – 689/1000

  17. Crispco
    December 8th, 2014

    Wow, how did you fail? Did you read the questions on this site? Try learning the theory then try again.

  18. none
    December 16th, 2014

    2,3 and 4 on the test in the past few days

  19. Jp
    December 22nd, 2014

    Q1 was on my exam on 21st of dec

  20. Montasir Osman
    March 19th, 2015

    Q2, 3 was there.

  21. barney
    March 20th, 2015

    passed on 3/13. questions 2 and 4 on it.tks 9tut

  22. Gurupreet Singer
    May 13th, 2015

    I failed this stupid test. None of these questions helped me!

  23. Marco
    May 13th, 2015

    I got Q2, Q3 today in my ICND2 exam.
    Thanks 9tut.

  24. ttn
    May 16th, 2015

    Q2,3 today. ICND2

  25. Rob
    May 19th, 2015

    Had 2,3,4 today 19/5/15

  26. Grisha82
    June 22nd, 2015

    Q3 got today.

  27. Brodie
    June 26th, 2015

    question 2 and 4 was on my exam

  28. Anonymous
    June 26th, 2015

    guys download dumps with nuggets free from this following link
    wurl. cc/dumps

  29. 9tut
    July 13th, 2015

    @all: We had to move all the questions and answers out of 9tut. We can only keep the explanation. You can download the questions and answers at: https://mega.co.nz/#!oIdESYbD!yyu33vygrfKPy4rcmcbV6qW2fxINNoTokuDM3CjA_og

  30. anon
    August 28th, 2015

    I had number 4 a couple of days ago

  31. Marco
    October 16th, 2015

    Passed on the 9th of October 2015 and had Drag and Drop Q 1,2,4 on Drag and Drop Questions 2.

  32. Marco
    October 16th, 2015

    About 3-5 new EIGRP Questions but the dump is still 100%

  33. shani
    July 12th, 2016

    Passed ICND 2 exam , scored 896

  34. Tom
    August 14th, 2016

    Ive seen no theory on poisoning, where can I find tis please?

    I am a premium member.

  35. Ryan
    August 25th, 2016

    Just took ICND2 and got question 2 & 4

  36. WLCCNA
    September 23rd, 2016

    Thanks Ryan

  37. Salene
    December 6th, 2016

    Buy updated Interconnecting Cisco Networking Devices Part 2 200-101 exam questions fromhttps://www.dumps4download.us/free-200-101/cisco-question-answers.html