Share your ICND2 Experience

@J ellyBrain
so thanks for your feedback about your exame

Just passed! Pretty much all the questions were from 9tut, except maybe 2 that were easy. Both sims were on here, very easy. Just Show run, and show frame-relay map is all you need.

On to the CCNP!

Cheers,

Well done to everyone that’s passed. Ya’ll are giving the rest of us hope. I’m taking my ICND2 next week!

Passed, had frame-relay sim and OSPF hotspot.
Thanks 9tut and all the lovely people who add comments.

@9tut Admin and @website,

Are you going to created OR update 9tut for new ICND1 and ICND2 (Version3)?? if yes what is the web link??

Can I take ICND2 with Expired ICND1?? would it be valid Cert?

Hi All,

is there NO sub netting at all in ICND2 ?

Thanks

I just took new ICND2 exam (200-105) ; I had three SIm ( with show commands) no configuration 1) EIGRP as in 9tut 2) OSPF neighbor problems (as in 9tut) 3) anew SIMS on ICND2 a big network ; you need to know MPL (study PPP Multilink) ; tunneling , PPP authentication ..the best way click on the questions ; then go for example to R1 and Branch 1 and see what is wrong ; use show ip int brief ; show run and you can eliminate the wrong answer.

Some question on ip OSPf mtu-ignore , one question on Intelligence DNS cloud computing ; HSRP state , SNMP v2 and SNMP v3 ; Policing . Some of new Multiple Question that was not on Old ICND2 exam. I did not have the New ICND2 exam.

I have passed icnd1 v2100-110 so if i give the icnd2 v3 then will I get ccna v3 certificate??

Just passed icnd 2 200-101 with 9xx. Thank you guys.

@Sp answer is yes, read about it on the cisco website.

james hi i also took the 200-105 and its exactly what you are saying

show etherchannel summary whats the load question
ospf vs ospv3 whats better with ospv3
hsrp mac address
ip sla frequency in sec or ms
tunnelling protocol for the rstp
how to disable DTP
extended acl numbers
if named acl are for only extended
voice qos 46
could you please mail me to chat

{email not allowed}m

if you delete 1 my address

could you please chat with me i have some questions with the answers

james hi i also took the 200-105 and its exactly what you are saying
show etherchannel summary whats the load question
ospf vs ospv3 whats better with ospv3
hsrp mac address
ip sla frequency in sec or ms
tunnelling protocol for the rstp
how to disable DTP
extended acl numbers
if named acl are for only extended
voice qos 46
could you please mail me to chat
{email not allowed}m
if you delete 1 my address
could you please chat with me i have some questions with the answers

geosids78 in gmail

did anyone have any subletting questions on 200-101 ICND2 ?

Thanks Melly

Took the 200-101 incd2 test today. I had 47 questions, all questions were listed here on 9tut except 3. Three questions were random dealing with Frame relay , pvs, svc, dlci, etc.. Scored a 970+ and am now CCNA 🙂 Thanks 9tut!!!

I did not have any direct subnetting questions but to answer a few of the questions you kind of have to know subnetting because all the questions on the test are basically the same as 9tut, but the answers may be a little different, so know your stuff.

Mr. Robot, Congrats. Taking my test tomorrow afternoon. I’ll let all know how I do.

I JUST PASS THE 200-101 09-08-2016. THIS WEB SITE IS AMAZING. I TRULY RECOMMEND.
THE SIM AND THE QUESTION ARE IN THE TEST.

Hi to all i just pass my icnd2 200-101 today with 970+ so let you know guys most of the question same only few question not on this site but if you have little bit understanding no problem ….. i have frame relay sim and ospf hotspot in frame relay they change the dlci value and the names so make sure you check with to command( show run and show frame-relay map ) to see what configration they did on frame relay…. drag and drop i had holdown timmer+splithorizon+rootposining +triggerd time… and Eigrp &ospf… best of luck to ypu all guys

I wanted to find out how to become a member of securitytut.com so I can view the 210-260 (CCNA security) exam questions?

I’ve been a member of 9tut, but I can’t see anywhere on the securitytut.com site to sign up to become a member? Or has the 210-260 questions been removed from that site?

Would quite like to take the 210-260 exam (CCNA Security), and I know 9tut was a great help for the CCNA R & S exam.

Any help would be great. TIA

Passed ICD200-101 yesterday 841 . Great Relief ! Thanks 9tut particularly on frame Relay simulator. Although the question was slightly , I managed to practice the commands well before hand.

Just Passed ICND2
Got frame Replay and OSPF hot spot
Thanks 9tut

Just passed….all from here…had OSPF and Frame Relay…..no real surprises….there was one that was about which route will be used….EIGRP RIP or OSPF……so know which one of those have priority. Good luck to all…on to the next one.

can anybody tell me why can’t I see the questions, i am already 9tut.net member. Today I am facing this problem ,it was not as before. I have my exam ICND2 this week? Kindly help me ??

https://web.archive.org/web/20150506052530/https://www.9tut.net/icnd2-200-101/new-icnd2-ip-routing

Thanks 9tut 960/1000

Taking it in 2 1/2 hours. I’ll let you guys know how it goes!

960 ha same thing like everyone says. Frame relay. Both drag and drops. I don’t think they’re changing anything since it ends on the 24th haha

@bendie

Which guide did you use to pass?

Took the 200-101 incd2 test today. thx 9tut.

I hope i end up working with someone of you, especially those that have just read this website. When it comes to the job itself, you won’t have a clue and will be found out very quickly. Paper certificates are only worth so much. Good luck!

Just passed , all questions from 9tut…. Frame relay, OSPF sims, 2 drag and drop (splitHorizon, poison reverse ….)
Thanks 9TUT

@CCIE….if all of that is true you will not be working with any from here b’coz they will not get the job. I doubt a real CCIE is making a comment on this site, and when would a new CCNA be working with a CCIE? The comment is just dumb!

Passed 200-101 couple days ago with 9xx/1000. All questions were from VCEs RonBoot 100q, Nada 120q, Debra 147q. Sims were Frame relay where you just type show frame-relay map and show run. Another one is an OSPF hotspot with questions and no configuration or show commands needed. Drop and drops same as everyone says.

CCIE.

These dumps help to pass the test, but real knowledge people already have on the job or they study the other materials as well. If someone want to be a real successful network engineer it would take much more than just passing CCNA.
Cheers.

Assume that all of the router interfaces are operational and configured correctly. How will router R2 be affected by the configuration of R1 that is shown in the exhibit?

A. Router R2 will not form a neighbor relationship with R1.
B. Router R2 will obtain a full routing table, including a default route, from R1.
C. R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
D. R2 will not have a route for the directly connected serial network, but all other directly connected networks will be present, as well as the two networks connected to R1.

What is the right answer?

It’s questions no 9. Static route been configured from R1 to R2

Please any has the link to download questions and explanations of 9tut? … it was on mediafire, but i am not able to find the link. Thanks

get the premier memberhip you will get all all questions. its worth it. its only $9

@Anon, of course i work with CCNA. New or not they should know the job. If you’ve passed the exam, id expect you to know what you’re doing. Do you want babysitting for a year or something? You pass, you have the knowledge. Simple. Your reply is just dumb.

P.S. the 200-101 exam will be retired on September 24, 2016, then the new exam is 200-105!

200-105 dumps for free: https://drive.google.com/open?id=0B-ob6L_QjGLpUTVNc3otMV8xMkU

Good Luck!

passed yesterday with 900. nearly all the questions were from 9tut. about three new question. the labs were the same with just changes in the names. ospf hotsopt and frame relay sim.
thanks 9tut

I passed 200-101 yesterday with a 933. This site along with the CCNAX version 3 bootcamp I attended a couple months ago was plenty of study material to review. Good luck to all who are taking the version 2 test before September 24th, and to all taking the version 3 test after that date.

I passed 44 out 47 question from site. thank you 9 TUT

Just passed my INCD2 200-101 with 9xx. Thanks 9tut!!!
CCNP here I come!!!

Just passed my ICND2 200-101 with 9xx. Thanks 9tut!!!
CCNP here I come!!!

Taking my test tomorrow, will post status of pass!

Just passed my test 9xx. Frame Relay, OSPF Hotspot and 47 questions all but two were on 9tut. If you read the Wendell Odom official ICND2 book they are in there.

Took the Exathis morning and passed with a score of 867. This site combined with cbtnuggets and Skillsoft courceware (which was ok but very out dated for the price) helped me pass. Had the Frame-Relay Sim and OSPF Hotspot and a large number of questions that were not on this site which is good.

Does anyone have the new dumbs? need a link thank you..

@Nobody:
Do you mean the DIKTA or review question from Odom’s book?

@Hoppy:
What do you mean by “large number of questions not on this site”?

Passed today, 986/1000.

just passed ICND2 (973). i had frame relay sim and OSPF Hotspot.
All thanks to God that worked through 9tut and Mr Tokpe (My instructor)

@Toto review questions from Odom’s book

which drag and drog??

Took today and passed with a 9xx/1000! Thanks 9tut! Best 9 dollars i ever spent!

Passed ICND2 v2 today. Used CBT Nuggets, Cisco Press, Boson practice exams and 9tut. Lots of similar questions, know the basics behind the answers here. Frame Relay and OSPF heavy. Great tutorials 9tut.

@nobody:
Thanks

Hey guys, to those who’ve taken ICND2 did you have OSPF simulation (under lab sims) or OSPF hotspot.

Passed today, 947/1000

Some new questions not on this site same as @hoppy

I’d say around 30 ish were but the new ones threw me, as long as you know your stuff you’ll be fine 🙂

Dears, Please update what was the simulation ?

Passed 9xx Frame Relay sim and ospf hotspot all q From Nada dump

passed today with 960/1000. There was NO EIGRP Sim. Only OSPF and Frame relay teslets with no configurations needed.

just know #sh frame-relay map and #sh run

All questions from 9tut.net and one or two questions from NADA dump. Last 10 questions or from Nada is not necessary. Good luck to all.

ipv6 one question and no questions from NAT

Anybody can advice about questions from PASSLEADER papers , there 200+ of them and from my understanding many of them from here and many from CCNA exam. Anybody had any of them during 200-101 Exam ?

EGY , is NADA dumps include passleader questions ?

Hi
Pass 200-101 ,few new questions rest from 9tut

thanks 9tut
looking forward to CCNA Security..

Hi guys I’m looking for any site for Microsoft like 9tute for test practice
This is my emai address {email not allowed} thank you so much

Hi 9 tute please if u know any sit about test practice about Microsoft please help me
Thank you

Hi there guys. I have been talking with friends who have recently sat the exam and there seems to be no subnetting questions in the ICND2? It is more focused to troubleshooting and configuration. Is there any reason for that? Thanks

There is some Subnetting needed in order to ask at least two questions from what I remember.

Passed Today with 1000/1000, 2 sims questions (OSPF hotspot and Frame relay) as well as 2 Drag questions..
9Tut is good, no new question for my test..
I would suggest using Actual test Dump with 149 Q&A..

@ blue what was the sims like?

Any idea about ICND1?

Hello guys taking the exam tomorrow. Is Troubleshooting the one from lab sim? Please advice thank you.

@Tjacks:
1- OSPF hot spot: here you dont need to use any command to get the answers.
2 Frame relay: 2 commands are mandatory to get the answers:
show run
show frame-relay map

Just passed the exam 20 minutes ago..986
– No subnetting
– No NaT
– No ACL
– No VTP
– only one IPv6 question
– Got OSPF hotspot and frame-relay sim( No configuration required?
– 2 Drag and drop questions.

My advise is to use these dumps just to make sure you pass becuase the exams are expensive but make sure that you know the content of ccna so that no one questions your certification when you are at the job…YOU NEED TO KNOW WHAT YOU ARE DOING AT YOUR JOB…

All the best…

Thanks @ X-Man
Thanks @ Blue.

Hi there guys. There does not seem to be any reference to NAT on the icnd2 which is where I would have expected to seen ACL configuration. Does not test on ACL’s. So I am guessing it is being moved to the new exam.

nice one x man

i have my exam booked for fri
i have been on a course and done CBTNUGGETS so just brushing up
is there many qustions not listed here that are on the test ? and if so enough to fail it ?

Hey X-Man. What drag and drop questions you get?

@Jeff, there are enough questions on the test not here on to fail. Its an 82.5% pass mark, out of 47 questions. So not a lot of room.

Passed on 17th High 900’s
-OSPF Hotspot
-Frame Relay
-Drag and Drop : Poisoned route and hold-down timer
-Default Route creates a routing loop
-(9TUT is a great resource!, use this site to supplement your knowledge and you will pass).

Passed 9/19/16 with 9xx Score!

Thanks 9tut and all the users!

I had OSPF Hotspot and Frame Relay for the “Sims”

Two drag and drop. Both from Drag and Drop 2 section. Study Q2, Q3 and Q4 from that section.

Sign up and download the PDF from this site: http://www.getfreedumps.com/pages.php?id=200-101

Its free and legit. I used that PDF to study the questions. There are a few in this pdf that are not on 9tut but were asked on the exam! I used the 2015-08-03 version. For the questions that conflict with 9tut’s answers (I think there are two), go with 9tut. For the one question in the PDF that lists 2 answers where 9tut only lists 1, go with the pdf 2 answer.

I’ll check back in a couple of days to see if anyone has any questions for me.

Good luck to all!

Passed {ICND2 200-101} today 09/19/2016 with almost %100. Got -OSPF Hotspot, Frame Relay as SIM questions {nothing to configure, just show commands}. Total 47 questions, I finished in about 40 minutes. No need to go anywhere else, 9tut is more than enough. Love you 9tut team.

Alex, guys what exactly is OSPF Hotspot about ? There is a ICND2 – Frame Relay Simulator
& EIGRP Troubleshooting Simulator , where can I find OSPF sim ?

Is it from ICND 1 ????

@Hunter OSPF-HotSpot {https://www.9tut.net/icnd2-200-101/ospf-hotspot} its not a sim like questions, but I got this one today in exam. its in ICND2.

Thanks Buddy

Has anyone that’s passed using this site had success getting a job? I’m asking out of pure curiosity; I’m worried by the time I get a job in this field i’ll lose this knowledge. More inquiring about other users experience in the field after getting CCNA and obtaining it using dumps. Thanks for you time in advance.

@moose

“If you don’t use it, you’ll lose it” it’s something my first boss told me and it ties into your knowledge.

If you don’t apply your knowledge and keep it active, then for sure you’ll forget and remember just a few things.

If you keep practicing, create labs on packet tracer, use 9tut questions and answers, SIMs… then you’ll be able to keep this knowledge fresh in your mind.

We hired some network engineers to help us with a project in our company and one of the guys set the routers to login local on console, but he forgot to setup the username and password for the router. I don’t doubt his skills, he just forgot. It happens to the most seasoned people and to the rookies. Just practice every day to keep this knowledge in your head.

I forgot to mention, we did not setup any remote connections for the router (no ssh or telnet) so we had to restart a router that was in production just to reset the password. It was a funny yet bad story to tell to our bosses on why we needed some unscheduled network down time.

Had 8 questions today on ACL’s so no your access control lists.

Anonymous was that on icnd2 ?

Pass 200-101 9xx +
Most questions on 9tut, +ospf hot without terminal(just answers) and Frame relay(same principles as here). Around 3 questions from CCNA materials. 9tut all that you need.

Passed ICND2 on Saturday with a 986. Probably doesn’t apply to more than a handful who are still getting in under the v2 wire but the premium was the best $9 I ever spent. Of course I recommend knowing your stuff inside and out because what else is the point but to sneak your way into a job you aren’t qualified for and will probably get fired from. But for a pure, studied my butt off and don’t want to risk failing by a few points, the quizzes are a guarantee you’ll pass if you can remember exact questions and answers. I bought it with two days to go. Everything was there. OSPF Sim, EIGRP sim, Frame Relay. No VTP, NAT, or ACL sims.

bnels, OSPF sim or HSPF Hotspot?
And EIGRP sim?
99% of the folks here got OSPF Hotspot and Frame Relay.

how offten do cisco chnage content ?
seems that most people have been getting the same ospf and frame relay hope it stays like that until fri when i take mine (last possible min lol )

Just passed today at 11:00 960/1000

Used CBT Nuggets & CCNA in 60 days.

47 Questions (nearly all on here about 4 that were not)
OSPF Hot Spot (same on here)
Frame Relay SIM (Names changed) SH RUN, SH FRAME-RELAY MAP

Got
NO IPV6
NO NAT
NO ACL
NO Sub-netting
NO EIGRP sim

Thanks to 9tut, spend the money. now CCNA good luck everyone, study hard do all the quiz’s and you are good to go.

Pass 986/1000
OSPF HotSpot – no config. just show run
Frame Relay – no config. just show run and show frame-relay map.

THANK YOU 9tut.net. More power.

Hi everyone, today pass sucessfully ICND2; Pass 986/1000.
Thanks to 9tut and Jeremy Cioara. Regarding test there was almost everything what is here. I have Frame-relay and OSPF HotSpo for lab sims. Only naming was different.
For everyone who want to pass ICND2 200-101 all of you have 5 days left. After 25 of September cisco will use new release ICND2 200-105
Once again THANKS 9TUT!!!!!