Share your ICND2 v3.0 Experience

for Malaysian CCNA CCENT Students

OSPF and EIGRP SIMs are only with IPv4?

yes i can guide ospf and eigrp even multilink —ppp authetication —so if you are in malaysia you can sent me your email i can sent you mail and let you know where you can come or sent me skyp id ——-mr not sure i will wait your reply

@Not Sure

Yes, IPv4 for the sims I had. Expect to know all the IPv6 material from the material here, though. Not much.

Hello @Shahib, @ Pl413r, @no, @Not Sure & everyone here, i just moved from ICND1 section to join you guys here, just passed my ICND1 now, going to ICND2 right away. Any useful info & corperation will be highly appreciated, am just new here. Thanks to you all. One love!

Thanks you for yours response. I will take exam tomorrow. I will share my experience with you.

@Not Sure, God will guide you. You must scale through

I passed ICND1 las Mon. and I want to take ICND2 please can anyone post the link of the last valid dump do you have?? I looked through the pages and I saw a lot of links!! which one still valid please, HELP

@Andy1
Congrats…..

I passed ICND2 today! 9xx/1000 Labs sims OSPF, EIGRP, GRE+CHAP.
ICND2pdf valid but some answer is wrong
Akurrukukman!!!

@Kurrukuk, congratz. Can you please share the link for the material please so that we can download also. thank you.

@Seeker, thank you.

I passed ICND2 today. I had OSPF, EIGRP and GRE labs.
I didn’t have Netflow or Frame Relay questions.
I had some new questions, but i forgot it. One new question was something like this:
Which faktor generated Bridge ID?
I answered bridge prio and MAC-Address.

@Not Sure congratz on your success. Can you please help us with a link to material you used please?

@notsure is icnd2pdf is valid!

can someone please share the link for the sims: OSPF , GRE and EIGRP.
i can’t seem to find them.

I am taking the exam next thursday

I used icnd2pdf and PDFs from Anonymous on site 22.
It’s in about 85-90% valid

Hi Guys just passed ICND2 gre, eigrpy and ospf sims topology same but configuration different hence leading different answers. Nothing new just go over all topics on 9tut and questions

@ avm congrats!!! please can you share the link of ICND2 questions? cause i found a lot of links, please help i want to take ICND2

@ Not Sure there are a lot of links in page 22, would you please tell us which one is still valid? thanks

@MM here is the link “icnd2.pdf”

Link: https://www.dropbox.com/sh/2imx6rougqnla2z/AAAMR_KERfE6fEJy0GYILEQYa?

@Andy1.

This is the link : https://www.dropbox.com/sh/2imx6rougqnla2z/AAAMR_KERfE6fEJy0GYILEQYa?

icnd2PDF.pdf

you can also see the “passleader”

https://www.dropbox.com/sh/2imx6rougqnla2z/AAAMR_KERfE6fEJy0GYILEQYa?dl=0

@MM, @Lackadaisical_Cisco, you guyz are here again, happy to meet u again. I am preparing already, but materials here are confusing. Le me try this one from @Lackadaisical_Cisco

Wish I will be here still I did not give second try @Andy1. Do you both will try for also CCNP SWITCH ROUTE TROUBLESHOOT after ICND2? @MM, @Andy1.

yes @Lackadaisical_Cisco, the journey continues but not as immediate as possible.

can anybody please share the answers for sims and new questions that came up?

Done with CCNA… Is there any website for the Security+ certification? I would really appreciate it if someone could tell me. Thank you in advance.

Are there any recommendations for study guides for CCNA ICND 2 200-105 that are updated for v3?

@ Lackadaisical_Cisco thank you so much!! wish you good luck, and get the best Network certificate eventually.

God bless you @MM

Hello,

I took my icnd2, 5 days ago. icnd2PDF.pdf and 9tut is totally valid specially the sims are all same as here. GRE, OSPF and EIGRP were the sims same as 9tut but different questions.

Passed with 9xx.

Good luck people. I want to say something regarding dumps. Read, learn the material good. If you can skip dumbs. You will feel better with yourself. if you’re not confident use them. But just to know you want this cert to be a pro and not having a useless paper sitting in your drawer.

My regards to 9tut. Thank you!

Hi @MM , @Andy1. can anyone give me the source/ pdf file of all 9tut question for ICND1? I can only see the answer , not the question. It is emergency, I have to pass second otherwise it will be a loss for me

Hi all, i there anybody that can maybe advise what new questions is in the exams? other than studying ICND2PDF?

Thanks guys…just a quick question, are the Sims also included in the icnd2PDF.pdf?

or they are on the separate document?

hey can anyone please confirm if the ICND2pdf is still valid if they take it sometime this week plz

share my Cisco 200-105 exam video here: https://www.youtube.com/watch?v=FBXuZDbS18k
I think it will be helpful in your preparation.

Shut up sidney we are trying to be serious here and help one another and you are here trying to milk money out of us.

Hello everyone just passing by.Now I am ready for the exam
watch this space

Which two statements describe the process identifier that is used in the command to configure OSPF on a
router? (Choose two.)
Router(config)# router ospf 1

A. All OSPF routers in an area must have the same process ID.
B. Only one process number can be used on the same router.
C. Different process identifiers can be used to run multiple OSPF processes
D. The process number can be any number from 1 to 65,535.
E. Hello packets are sent to each neighbor to determine the processor identifier.

what is the correct answer?
AC or CD

Lackadaisical_Cisco i think I talked to you before!! it is weird that you don’t have ICND1 pdf files? please go to the link below, you will find in the end of pge that i pu the link of pdf files and question that i got in my test in 7-31, just understand the labs and keep repeating the questions again and again cause 90% from it!

https://www.9tut.net/icnd1-100-105/share-your-icnd1-v3-0-experience/comment-page-32#comments

I am ready for icnd2

I am done with icnd1 thank u @MM

failed again on my second attempt….

You have configured your switches with the spanning-tree vlan x root primary and spanning-tree vlan x root secondary commands. Which of the following tertiary switch will
take over if both switches fail?
A. A switch with priority 4096
B. A switch with priority 8192
C. A switch with priority 12288
D. A switch with priority 20480

I had this on my exam today.. not sure about the answer..

@kokolet i failed in my last attempt…
my next-to-last question was the OSPF lab and I’m running out of the time

I’ll try again the test soon, but i see that using the icnd2.pdf, and trobleshoting the labs, we can pass.

Can you share your experience with us? Do you get new questions ?

Best wishes

Which configuration enables OSPF for network 192.168.1.0/24?
A. router ospf
router-id 192.168.1.0
B. router ospf 1
network 192.168.1.0 255.255.255.0 area 0
C. router ospf 1
neighbor 192.168.1.0
D. router ospf 1
area 0 virtual-link 192.168.1.0

I had this as well… which i don t really understand it .. it s B .. but WHY?
suppose to be network 192.168.1.0 0.0.0.255 area 0 .. can anyone explain the answer? thanks

I got like 3 new questions… I think the deal breaker is the simulations. You have to be able to get it right. same simulation questions as the one on the adjusted file/9tut, perhaps a different answer.

@kokolet can you remember the 3 new questions?

The 3 new questions wouldn’t help you pass the test. Your chance of passing the test depends on the simulations.

@ Lackadaisical_Cisco oh congrats!!
so far i’m reading comments and i saved the links from page 24, i will study these links, book, and lynda video and see what will happen.
wish you good luck !

Hi @Player1 we need latest for 200-105 not for 200-125

Thank you @MM

@Lackadaisical_Cisco It wouldn’t hurt to look over the 200-125 PDF for the 200-105 exam. Chances are, some of the questions from the 200-125 exam will probably be on the 200-105 exam.

are there any subnetting questions on icnd2?

Good day!

Can you explain me this Q:

Which three commands must you enter to create a trunk that allows VLAN 20? (Choose three)
A. Switch(config-if)#switchport mode dynamic auto
B. Switch(config-if)#switchport mode trunk
C. Switch(config-if)#switchport trunk allowed vlan 20
D. Switch(config-if)#switchport mode dynamic desirable
E. Switch(config-if)#switchport trunk encapsulation dotlq
F. Switch(config-if)#switchport trunk native vlan 20

According to icnd2PDF.pdf, the answer is BCE, but for mi E is wrong. I think that D is the correct.

@Soon_CCNA The first command you need to enter before even making the switchport a trunk is to define the encapsulation to be used. ios will not let you do ‘switchport mode trunk’ without defining the encap. So in order the commands would be E->B->C

Some else passed icnd2 today? on friday i will take my exam.

Hi @kokolet could you please tell me , how many Sim. I have to solve in ICND2?

thank you @Blacki

@Blacki are the Sims also included in the Document?

Hello guys, anyone has a dump for 210-060 CISCO CICD exam? If you do, send it to email:
{email not allowed}
Thank you

@Lackadaisical, it’s 3 simulations. Ospf, gre, and Eigrp

@koklet, are the 3simulations in any of these document?

I remember getting this question, with a different answer option.

which of the configuration can you apply to enable encapsulation on a subinterface ?

The right answer was change to 20

@Dotcom…. Yes, and I think those answer are wrong now. Cisco may have change the configuration on those sim

Does any has the new lead2pass file with 402 Q&As ?

Yes @Dotcom there are many sims, but everybody talk that change sim questions

Anyone know the new sim questions?
Is it that the answers are worded differently? or have they totally changed?

Have taken the exam twice and got the same sim, just as everyone have been getting Ospf, Gre, and Eigrp. same questions as the one on the file,but I think they have change the configuration.

Does anyone have pdf version of lamle icnd2

@Kokolet what file are you referring to?

The adjusted file on page 21 or 22, and also 9tut simulations answer are wrong now.

Just passed ICND2! 930/1000 Adjusted VCE is absolutely valid. Sims are like everyone says EIGRP, OSPF and GRE. The answer choices are the same as the 9tut sims but the actual answers are different. not too hard, just go through each answer and verify. Thanks 9tut!!!

@Del, Can you please what was missing on the sim configuration ?

Does any one have todd Lamle book for ICND2 IN pdf.. if yes please share it..

Has anyone taken the icnd2 exam recently??

@Amy read like 3 posts above yours…

Missed that. Cheers

Have you done it LessStress?

I’m due to a week today

Does anyone know if lead2pass have the right answer to the simulations questions ?

@Del WELL DONE! I’m going to be sitting my exam at the start of next week.

@Amy Taking it tonight in Florida. Will update you all after. Took ICND1 with using wendells book and 9tut plus a bunch of labs, easy as pie

Congrats @ma nepali such a brilliant score.Then @ma nepali could you please answer these question? as you got 1000 that means all your answer was correct. I am done with ICND1 , but i need to know the answer
1.Refer to the exhibit. Which statement describes the effect of this configuration?
Router#configure terminal
Router(config)#vlan 10
Router(config-vlan)#do show vlan
A. The VLAN 10 VTP configuration is displayed.
B. VLAN 10 spanning-tree output is displayed.
C. The VLAN 10 configuration is saved when the router exits VLAN configuration mode.
D. VLAN 10 is added to the VLAN database.
2.Which MTU size can cause a baby giant error?
A. 1500
B. 9216
C. 1600
D. 1518
3.Which RFC was created to alleviate the depletion of IPv4 public addresses?
A. RFC 4193
B. RFC 1519
C. RFC 1518
D. RFC 1918
4. Which one is the stateless address assignment?
1.DHCP
2.DHCPv6
3.autoconfigutation
it will be helpful for new commer.

@ lackadaisical _cisco Thank you man!!!! i didnot get any from the above question.
I am into ICND2 now.. Do you have any book in pdf or materails helpful for icnd2.. i am having tough time understanding STP.. my first topic in icnd2

@LessStress How did the exam go?

Hi @ma nepali watch cbtbuggets

sorry cbtnuggets

@LessStress let us know how it went dude

Just passed today with a 9xx. Adjusted icnd2 is still valid with same sims confías are different but if u study will work. I used the sybex book, some cbtnuggets, and Chris Bryant on udemy

does any have a link to a drive that has a cracked version of a vce player

Passed yesterday using 9TUT and cbtnuggets –

Had a question that involved the “Categories of Causes” for slow VLANs. Slow Collision Domain, Slow Broadcast Domain, Slow InterVLAN…

Had a question where the answer involved “metric weights 0 0 0 1 1 1” in the EIGRP sim.

Know this: Port-ID is made up of 2 values; port Priority (4 bits.default 128) + Port identifier (12 bits, the formula to calculate this uses the physical port number value and the lower the physical port value is the lower the result of the calculation, therefore the lower the physical port value the lower the Port identifier)

I am Looking for similar site for 200-355 CNA Wireless test.

Any suggestions?

Well done Woody! My exam is the start of the week.

Is the port-if part a question in the exam?
Is the EIGRP question to do with the K values, such as bandwidth and delay?

Hi, please I need the Lab Simulation for GRE, OSPF and EIGRP. Please how can I get it?

email omotkay1 at yahoo dot com

Hey anyone Has a good way of practicing or learning the lab

Hey if anyone takes the test today and passes using the ICND2 pdf please let us know.

thanks

Can anyone help me with GNS3?? I am not able to configure switches… how can i get console window dor switch?? And is cbt nuggets is worth 89/month?? I am confused … help ke out.. how shall i start studying icnd2??